Docs

The map

Colours the forecast regions by snowfall, freezing level, snow depth, danger or terrain, with places, field reports and stations on top.

Updated November 13, 2026

Controls

  • Search and Ask at the top: search regions, resorts, cabins, weather stations, your spots and mountains, or open Ask the Doctor across every region.
  • Layers: what colours the map. One colour layer at a time.
  • Show (the eye): which places, reports and stations sit on top.
  • Compare: opens the grid and the Timeline over the map.
  • The day strip and legend at the bottom, for the layers that change by day.
  • 3D, locate, north, fit to favorites, new spot on the right.

Tap a region, resort, cabin, mountain or spot to open its preview. From the preview, Full report opens the report.

Layers

The Layers menu: Snowfall, Freezing level, Snow depth and Danger under Colour the map by, then ATES, Slope angle, Aspect, Elevation band and Satellite only under Terrain, and an Elevation lines switch.
The Layers menu, with Freezing level picked.
LayerColours the map byFromDays
SnowfallNew snow over the days you pick, in cmHRDPS and RDPSAny run of days on the strip
Freezing levelThe day's highest freezing level, or its average, in mHRDPS and RDPS, worked out from the airOne day
Snow depthSnow on the ground, in cmCaLDASOne day, today or earlier
DangerEach region's highest rating that dayThe avalanche bulletinOne day
ATESAvalanche Terrain Exposure Scale ratingsAvalanche CanadaNone
Slope angleHow steep the ground isNRCan's 30 m heightsNone
AspectWhich way slopes of 20° and up faceNRCan's 30 m heightsNone
Elevation bandAlpine, treeline or below treeline, from tree coverNRCan's land coverNone
Satellite onlyNothing; the picture aloneMapboxNone

Elevation lines are a switch under the layers. Lines don't hide colour, so they go on top of any layer. Two colour layers would mix into colours that mean nothing, so there is one at a time.

The weather layers fade a little as you zoom in, from 95% at zoom 8.5 to 60% at zoom 11, so the ground shows through when you're looking at one valley.

The day strip

Five days: 2 days ago to the day after tomorrow. It sits with the legend at the bottom of the map, and at the top of Compare.

  • Snowfall adds up a run of days. Tap a day for that day alone, tap a second day to add up every day between them, or drag across. It opens on the 2 days before today and today.
  • Freezing level, Snow depth and Danger show one day. Snow depth can't pick days ahead: CaLDAS estimates now and doesn't forecast.
  • Terrain layers have no strip. The ground doesn't change by day.

Days are Pacific calendar days. Past days are what the model said for those days at the time, not measured snow.

Show menu

On the mapStartsFrom zoomNotes
My spotsOnOnly you see them
ResortsOn6, names at 740+ resorts
Region namesOff
CabinsOff8, names at 8.5
MountainsOn10, names at 11A triangle where the mountain has an English Wikipedia article; any named mountain can be searched
Field ObsOn6The past 7 days, as binoculars; a red ring means an avalanche or an incident
StationsOff8, numbers at 10A snowflake where it measured snow, a windsock for wind, a dot for temperature only; grey after 6 hours without a report
WebcamsOn8; under 1,000 m at 10A violet camera; one with an arrow opens the owner's page. See Webcams and roads
Road closuresOn5DriveBC's closures in red, solid when closed, dashed when open but major

A switch you change stays the way you left it on that device.

Snowfall

From
HRDPS (2.5 km) where it reaches, RDPS (10 km) after that, as raw grids from MSC GeoMet
Updated
Twice a day, from the runs that start at 5 AM and 5 PM Pacific
Bands
0, 2, 5, 10, 15, 20, 30, 40, 50 and 75+ cm; under 1 cm is clear
  • One run per day. Each day on the map comes from one model run: the newest HRDPS run that started before the day and reaches its end, or else the newest RDPS run that covers it. A day is never stitched from two forecasts.
  • Each day's snow is the model's running total at the end of the day minus at its start. A run of days is the sum of its days, so 5 cm reads the same colour over one day or five.
  • Rain or snow on this layer is the model's own call. The weather table, Compare and previews use our rule, so in a warm storm the two can differ.
  • Water to snow: 7 to 1. Every millimetre of water is 0.7 cm of snow, everywhere in the app. Cold, dry storms likely read shallower than they are, more in the interior than on the coast. One ratio lets every snow number be compared with every other.
  • Past days come from our own archive. GeoMet serves about a day of runs, so we keep each day as we build it. A day we never stored shows as not available.

Freezing level

From
The model's air temperature and height at nine levels, from about 100 m to 4,200 m
Shows
The day's highest (Max) or its whole-day average (Avg), from the switch in the legend
Bands
250 m steps, from deep blue under 500 m to purple at 2,500 m and up

We walk up the nine levels and find where the air goes from above 0°C to at or below it, then estimate the height between those two levels. The map checks every 3 hours and keeps the day's highest, because the highest point is how far up the melting reaches.

  • A warm layer aloft. In a warm storm the air can warm going up before it cools. With more than one crossing, the freezing level is the top of the warm air.
  • Freezing all the way down reads 0 m.
  • One rule everywhere. The weather tables, charts, Compare, the previews and the report all use the same calculation, so the map and the numbers agree.

The common shortcut takes the temperature near the ground and cools it 6.5°C per km. Checked against the model's own air over about 110,000 squares of BC's regions on two days, it was more than 300 m off in about 4 squares of every 10, and more than 500 m off in about 1 in 4.

0 m 1,000 m 2,000 m 3,000 m 4,000 m -12° -8° -4° 0° +4° 0°C From the air: about 2,600 m Shortcut: about 1,250 m warm layer aloft shortcut: snow the air: melting Air temperature
The same storm, two ways. The model's air at its nine levels (blue) warms going up before it cools, so snow is melting up to about 2,600 m. The shortcut (grey, dashed) cools a fixed 6.5°C per km from the ground and puts the freezing level near 1,250 m. Illustrative, shaped on a warm storm at Ashlu on October 14, when the model's air read +1.7°C at 1,500 m and +3.4°C at 2,000 m while the shortcut said −1.7°C at 1,500 m.

Snow depth

From
CaLDAS, Environment Canada's land and snow analysis, 2.5 km squares, a new estimate every 3 hours
Days
Today is the newest estimate; a past day is its last estimate of that day; no days ahead
Bands
5, 10, 25, 50, 75, 100, 150, 200, 300 and 400+ cm, two shades per colour; under 5 cm is clear
  • Each square is an average. One 2.5 km square can run from a valley floor to a ridge.
  • Glaciers read deep. CaLDAS counts glacier ice as snow, so icefields sit in the top band all year.
  • An estimate. It isn't measured, so it can be off in places. Stations show measured depth where there is one.

Danger

Each region takes the colour of its highest rating of the three bands that day. One colour has to pick one band, and the highest is the one you can't miss. The preview and the report show all three. In early season or spring a band carries a word instead of a number, and the region shows it in light blue.

Terrain layers

Four 3D views of Garibaldi Lake toward Black Tusk: slope angle, aspect, ATES ratings and the elevation band from tree cover.
Garibaldi Lake four ways: slope angle, aspect, ATES and the elevation band.

Slope angle

ColourDegrees
Green20 to 26
Yellow27 to 29
Light orange30 to 31
Dark orange32 to 34
Red35 to 45
Purple46 to 50
Blue51 and up

Under 20° is not coloured. These are the colours CalTopo and Gaia use, so they read right away if you know those apps, and they change at 30° and 35°, where most avalanches start to get likely.

Aspect

Eight directions, only on slopes of 20° and up, since on flatter ground the way a slope faces doesn't mean much: N NE E SE S SW W NW.

Slope and aspect data

  • NRCan's MRDEM, a 30 m map of the ground's height. Most of it was measured by radar satellites between 2011 and 2015; about a tenth of BC and the Alberta Rockies uses lidar, mostly valleys, towns and logged land. NRCan puts the radar heights within about 1.6 m on open ground and 5 m under forest.
  • Smoothed up close. At the closest zooms the heights are smoothed onto each tile before the slope is worked out, so band edges curve with the ground. It adds no detail: a roll shorter than about 30 m can still be missed.
  • True north. MRDEM's grid is turned up to about 25° from true north in BC. That's corrected, or every aspect would be rotated.
  • Built once. The ground doesn't change, so the tiles were built ahead of time. They drape over the 3D terrain, so the colours sit on the shape of the slope.

ATES

Avalanche Canada's Avalanche Terrain Exposure Scale ratings, from zoom 10: Simple Challenging Complex. Unshaded terrain is unrated, not necessarily safe. The ratings were last synced in August 2026.

Elevation band

Avalanche Canada describes its bands by the terrain: alpine is open ground above the trees, treeline the change from forest to open, below treeline mostly forest. So the layer, and the band a new pin suggests, come from what covers the ground (NRCan's 2020 land cover, 30 m squares), not from height alone:

  • The local tree line: in each 1 km block, the height of the highest trees with open alpine ground above them, then the middle of those within about 9 km. About 1,800 m at Whistler, 2,100 m at Rogers Pass, 2,300 m at Lake Louise.
  • Alpine: under a quarter forest within about 350 m, or 100 m above the local tree line, or mostly bare ground close to it.
  • Below treeline: at least three quarters forest within about 350 m and more than 200 m under the tree line.
  • Treeline: everything between.
  • Close calls: where a small change in the rules would flip the answer, the app asks you to pick between the two.

Clear-cuts, ski runs and valley grassland don't count as open ground well below the tree line. The 2020 land cover misses newer burns and logging, so you confirm the band. It covers BC and the Alberta Rockies; elsewhere, the band comes from where a pin's height sits between its region's heights.

Rendering

  • 3 km squares in the map's own projection, which at BC's latitudes is finer than HRDPS's 2.5 km, so nothing is lost. A square shows only if its centre is inside a forecast region.
  • Ten hard bands per layer, no blends. Two shades of a blend 3 cm apart are hard to tell apart; a band edge isn't. The legend labels every band.
  • Every run of days is drawn ahead. The five days make fifteen runs, each the sum of the same daily grids, so picking Saturday to Monday loads one finished image.
  • Region numbers in previews and Compare come from five points per region, not these squares. See Regions and heights.

The colours are square by square; a region's numbers are an average of five points at one height. When they disagree, the storm was usually uneven: it shows as a hot spot in the colours and a smaller average in the numbers.

Design decisions

ChoiceWhyWhat it costs
One model family (GEM)The map, tables and charts can't disagree by sourceNo second opinion on the map; the Weather tab carries the other models
Twice a dayPlenty for planning, and the same rhythm as the rest of the appThe map can be up to 12 hours old
One run per dayEach day is one forecastA newer run waits until it covers the whole day
7 to 1 everywhereEvery snow number compares with every otherCold storms likely read shallow
Freezing level from the airThe ground shortcut was 300 m or more off in 4 squares of 10About 21% more weather calls
Snow depth from CaLDASEnvironment Canada already estimates it for the whole country every 3 hoursA 2.5 km average; glaciers read deep; no days ahead
Hard bandsDifferences show at a glanceTwo places either side of a line look a band apart
Band from tree coverMatches how Avalanche Canada defines the bandsMisses newer burns and logging, so you confirm it

Limitations

  • Resolution. Weather in 2.5 km squares, terrain in 30 m. A gully, a cross-loaded slope or a sun crust on one aspect is smaller than either.
  • Wind transport. The models show where snow falls. Wind moves it after; a lee slope can hold far more than the map shows.
  • Model output. Snowfall and the freezing level are forecasts, past days included; snow depth is an estimate. A storm the model placed 20 km off is 20 km off on the map.
  • Forecast range. Each day ahead is less certain, and the day after tomorrow comes from the coarser RDPS.
  • Surface temperature. The freezing level is the air's. On a clear night the snow surface gets colder than the air, and in an inversion the cold sits low.
  • Terrain detail. Rolls under 30 m can be missed. The radar heights are weakest on the steepest faces and on glaciers that have thinned since 2015.

Sources and licences: Sources.

Something here wrong or unclear? Write to hello@snowdoctor.ca.